If you’ve ever seen a message on your laptop saying “automatic repair, your PC didn’t start correctly,” you’re not alone.
This is a common error message that can occur for a variety of reasons, including hardware issues, software problems, or even malware infections. In this article, we’ll take a look at some of the common causes of this error message and walk you through the steps you can take to fix it.
If your laptop is showing the message “Automatic Repair, your PC didn’t start correctly,” there are several steps you can try to fix the issue: Restart your laptop: Sometimes, the issue can be resolved by simply restarting your laptop. Run a system file check: Open the Command Prompt by pressing the Windows key + X and selecting “Command Prompt (Admin).” Type “sfc /scannow” and press Enter. Run a disk check: Open Command Prompt (Admin) again and type “chkdsk /r” and press Enter. Restore to a previous system restore point: If you have a restore point from before the issue started, you can try restoring your laptop to that point. Reset your laptop: If none of the above steps work, you can try resetting your laptop. Open the Start menu and search for “Reset this PC.”
If none of these steps work, it may be a hardware issue and you should consider contacting a professional or the manufacturer for assistance.
Here is a table that outlines possible causes and solutions for a laptop showing the “Automatic Repair” message:
| Cause | Solution |
|---|---|
| Corrupted system files | Use the System File Checker tool to scan and repair corrupted files. Open Command Prompt as an administrator and type “sfc /scannow” and press Enter. |
| Startup settings are incorrect | Boot your laptop in Safe Mode and try to undo recent changes or updates. You can access Safe Mode by pressing the F8 key during startup. |
| Damaged hard drive | Use the Check Disk tool to scan and repair errors on your hard drive. Open Command Prompt as an administrator and type “chkdsk /f” and press Enter. |
| Malware or virus infection | Use antivirus software to scan and remove any malware or viruses from your laptop. |
| Corrupted or outdated drivers | Update or reinstall the drivers for any hardware devices that are not functioning properly. You can do this through Device Manager. |
| Faulty hardware | If all other troubleshooting steps fail, it is possible that there is a hardware issue with your laptop. Contact a professional technician for repair or replacement of the faulty hardware. |
Note that these are just some possible causes and solutions, and depending on the specific issue with your laptop, you may need to try other troubleshooting steps.
Restart your laptop
When you restart your laptop, it essentially shuts down all running processes and starts them up again from scratch.
This can help to clear any temporary glitches or issues that may be causing your laptop to display the “Automatic Repair” message.
To restart your laptop, you need to press and hold the power button until your laptop turns off completely.
Then, wait a few seconds and press the power button again to turn it back on.
This should initiate a fresh start-up sequence and hopefully resolve the issue.
However, if the “Automatic Repair” message persists after restarting your laptop, you may need to try some of the other troubleshooting steps mentioned earlier.
here’s a tabular summary of the “Restart your laptop” troubleshooting step:
| Troubleshooting Step | Description |
|---|---|
| Restart your laptop | Press and hold the power button until your laptop turns off completely. Wait a few seconds and press the power button again to turn it back on. This can clear any temporary glitches or issues that may be causing the “Automatic Repair” message. |
It’s important to note that if the “Automatic Repair” message persists after restarting your laptop, you may need to try some of the other troubleshooting steps mentioned earlier.
Run a system file check
Running a system file check is a troubleshooting step you can take if your laptop is displaying the “Automatic Repair” message. It involves using the Command Prompt, which is a tool you can use to enter commands and execute various tasks on your laptop.
To run a system file check, you first need to open the Command Prompt by pressing the Windows key + X on your keyboard.
This will bring up a menu of options, and you should select “Command Prompt (Admin)” from the list.
This will open the Command Prompt with administrator privileges, which will allow you to execute system-level commands.
Once the Command Prompt is open, type “sfc /scannow” and press Enter. This will initiate a system file check, which will scan your laptop’s system files for any errors or corruption.
If any issues are detected, the system file check will attempt to repair them automatically.
It’s important to note that running a system file check can take some time, so be patient and allow the scan to complete before closing the Command Prompt.
Once the scan is finished, you can close the Command Prompt and restart your laptop to see if the “Automatic Repair” message is still appearing.
here’s a table summarizing the “Run a system file check” troubleshooting step:
| Troubleshooting Step | Description |
|---|---|
| Run a system file check | Open the Command Prompt as an administrator by pressing Windows key + X and selecting “Command Prompt (Admin)”. Type “sfc /scannow” and press Enter to initiate a system file check. This will scan your laptop’s system files for errors or corruption and attempt to repair them automatically. Be patient and allow the scan to complete before restarting your laptop to see if the “Automatic Repair” message still appears. |
Run a disk check
Running a disk check is another troubleshooting step you can take if your laptop is displaying the “Automatic Repair” message.
It involves using the Command Prompt to check your laptop’s hard drive for errors and attempt to repair them.
To run a disk check, you first need to open the Command Prompt with administrator privileges.
You can do this by pressing the Windows key + X on your keyboard and selecting “Command Prompt (Admin)” from the list of options.
Once the Command Prompt is open, type “chkdsk /r” and press Enter.
This will initiate a disk check, which will scan your laptop’s hard drive for errors and attempt to repair them. The “/r” parameter tells the disk check to attempt to recover any bad sectors on the drive.
It’s important to note that running a disk check can take a while, depending on the size of your hard drive and the amount of data stored on it.
Allow the disk check to run to completion, even if it takes several hours to finish.
Once the disk check is finished, you can close the Command Prompt and restart your laptop to see if the “Automatic Repair” message is still appearing.
If the message persists, you may need to try some of the other troubleshooting steps mentioned earlier.
here is a tabular format of the steps for running a disk check:
| Step | Description |
|---|---|
| 1. | Open Command Prompt with administrator privileges. |
| 2. | Type “chkdsk /r” and press Enter. |
| 3. | Allow the disk check to run to completion, even if it takes several hours. |
| 4. | Close the Command Prompt. |
| 5. | Restart your laptop and check if the “Automatic Repair” message still appears. |
Restore to a previous system restore point
If your laptop is displaying the “Automatic Repair” message, you can try restoring your laptop to a previous system restore point to see if that resolves the issue.
A system restore point is a snapshot of your laptop’s system files and settings at a particular point in time.
To restore your laptop to a previous system restore point, you first need to open the Start menu and search for “System Restore.” Select the “System Restore” option from the search results to open the System Restore window.
In the System Restore window, you will see a list of available restore points.
Select a restore point from before the issue started, and click “Next” to proceed.
Follow the prompts to confirm the restore point and begin the restoration process.
Note that restoring your laptop to a previous restore point can take some time, and you should avoid interrupting the process once it has started.
Once the restoration process is complete, your laptop will automatically restart.
Check to see if the “Automatic Repair” message is still appearing. If the message persists, you may need to try some of the other troubleshooting steps mentioned earlier.
here is a tabular representation of the steps to restore your laptop to a previous system restore point:
| Step | Action |
|---|---|
| 1 | Open the Start menu |
| 2 | Search for “System Restore” |
| 3 | Select “System Restore” from the search results |
| 4 | In the System Restore window, select a restore point from before the issue started |
| 5 | Click “Next” to proceed |
| 6 | Follow the prompts to confirm the restore point and begin the restoration process |
| 7 | Wait for the restoration process to complete |
| 8 | Once the process is complete, your laptop will automatically restart |
| 9 | Check if the “Automatic Repair” message still appears |
| 10 | If the message persists, try other troubleshooting steps |
Reset your laptop
If you have exhausted all the above troubleshooting steps and your laptop is still displaying the “Automatic Repair” message, you can try resetting your laptop.
This involves resetting your laptop back to its original state and deleting all your files and programs in the process.
Therefore, it is essential to back up any important data before proceeding.
To reset your laptop, open the Start menu and search for “Reset this PC.” Select the “Reset this PC” option from the search results to open the Reset this PC window.
In the Reset this PC window, you will see two options: “Keep my files” and “Remove everything.” If you choose “Keep my files,” your personal files will be saved, but all programs and settings will be removed.
If you choose “Remove everything,” all files and programs will be removed, and your laptop will be reset to its original state.
Once you have made your selection, follow the prompts to confirm the reset and begin the process.
Note that resetting your laptop can take several hours, so be patient and avoid interrupting the process once it has started.
After the reset is complete, your laptop will automatically restart. You will need to go through the initial setup process again, including creating a user account and setting up your preferences.
Check to see if the “Automatic Repair” message is still appearing. If it is, there may be an underlying hardware issue, and you should consider taking your laptop to a professional for repair.
Here is a tabular summary of the troubleshooting steps for fixing the “Automatic Repair” issue on a laptop:
| Troubleshooting Step | Description |
|---|---|
| Restart your laptop | Press and hold the power button until your laptop turns off, then press the power button again to turn it back on. |
| Run a system file check | Open Command Prompt (Admin) and type “sfc /scannow” to scan your system files for errors. |
| Run a disk check | Open Command Prompt (Admin) and type “chkdsk /r” to check your hard drive for errors. |
| Restore to a previous system restore point | Open the Start menu and search for “System Restore” to restore your laptop to a previous point in time. |
| Reset your laptop | Open the Start menu and search for “Reset this PC” to reset your laptop to its original state, deleting all files and programs in the process. |
Remember to back up any important data before resetting your laptop, as all files and programs will be deleted during the process. If none of these troubleshooting steps work, there may be an underlying hardware issue, and it may be necessary to seek professional repair.
Conclusion
In conclusion, if your laptop is displaying the “Automatic Repair” message, there are several troubleshooting steps you can take to try and resolve the issue.
These include restarting your laptop, running a system file check and a disk check, restoring to a previous system restore point, and resetting your laptop.
It’s important to note that resetting your laptop will delete all your files and programs, so be sure to back up any important data before proceeding.
If none of these troubleshooting steps work, there may be an underlying hardware issue, and you should consider taking your laptop to a professional for repair.
Overall, with patience and persistence, you can often resolve the “Automatic Repair” issue and get your laptop back up and running again.