Laptop won’t start after Windows update: Easy Fix

Are you experiencing the exasperating problem of your laptop failing to start after a Windows update? This situation can be incredibly frustrating, but fear not! In this article, we will walk you through some easy fixes and troubleshooting steps to help you resolve the issue. So, let’s dive in and get your laptop back on track!


If your laptop won’t start after a Windows update, try power cycling, checking for error messages, booting into Safe Mode, using System Restore, uninstalling recent updates, updating drivers, and running Startup Repair. If the problem persists, consider seeking professional help. Back up your data regularly to prevent data loss.

Remember to back up your important data regularly to avoid potential data loss during troubleshooting.

Power cycle your laptop

Power cycling your laptop involves a series of steps to reset its hardware components and clear any temporary issues that may be causing it to not start properly. Here’s a breakdown of the process:

  1. Disconnect the power adapter: Unplug the charger or power adapter from your laptop. This step ensures that the laptop is not receiving any power during the power cycling process.
  2. Remove the battery (if it’s removable): If your laptop has a removable battery, slide the latch or release mechanism to remove the battery from the laptop. This step is only necessary if your laptop has a removable battery; otherwise, you can skip this step.
  3. Hold down the power button: With the power adapter and battery disconnected (if applicable), press and hold down the power button on your laptop for about 15 seconds. This action helps discharge any residual power and resets the hardware components.
  4. Reconnect the power adapter: After holding down the power button, plug the power adapter or charger back into your laptop. Make sure the power adapter is securely connected to both the laptop and the power source.
  5. Try turning on your laptop: Once the power adapter is connected, press the power button again to turn on your laptop. Hopefully, this power cycling process will resolve any temporary issues and allow your laptop to start normally.

It’s important to note that not all laptops have a removable battery. If your laptop’s battery is non-removable, you can still perform the power cycling steps by disconnecting the power adapter and holding down the power button for the specified time.

Laptop won't start after Windows update: Easy Fix

Check for any error messages.

When your laptop encounters a startup issue after a Windows update, it might display error messages or error codes on the screen.

These messages or codes can provide valuable information about the specific problem that is preventing your laptop from starting properly. Here’s an explanation of why it’s important to note them down:

  1. Identifying the issue: Error messages or codes can give you insights into the specific problem your laptop is facing. They might indicate issues with specific hardware components, drivers, or software conflicts. By noting down the error messages or codes, you have a starting point for troubleshooting and can look for specific solutions related to the identified problem.
  2. Online search: Once you have the error messages or codes, you can search for them online. Often, other users might have experienced similar issues and found solutions or workarounds. By searching for the error message or code, you can find relevant forum discussions, support articles, or official documentation that provide steps to resolve the problem.
  3. Tech support assistance: If you need to reach out to technical support for assistance, providing the error messages or codes can help them understand the issue more accurately. They can analyze the error information and guide you with specific troubleshooting steps or direct you to the appropriate resources for resolving the problem.
  4. Documentation and tracking: Keeping a record of the error messages or codes can be useful for future reference. If you encounter similar issues in the future, you can refer back to the recorded information and use it as a reference point for troubleshooting or seeking assistance.

When you encounter an error message or code on your laptop’s screen, it is generally a good practice to take a clear note of the exact wording or code sequence.

If possible, capture a photo or write down the error message or code precisely as it appears. This information can greatly assist in diagnosing and resolving the problem effectively.


Boot into Safe Mode.

Booting into Safe Mode is a troubleshooting step that can help determine if conflicts with drivers or software are causing startup issues after a Windows update. Here’s an explanation of how to enter Safe Mode on your laptop:

  1. Turn on your laptop: Start by turning on your laptop as you normally would.
  2. Access the advanced boot options: During the boot process, you need to access the advanced boot options menu. To do this, you can try either of the following methods:
    • Method 1: Press the F8 key: As your laptop starts up, immediately start pressing the F8 key repeatedly. Keep pressing it until you see the advanced boot options menu on your screen.
    • Method 2: Press Shift + F8 keys: If the F8 key doesn’t work, you can try pressing and holding the Shift key while repeatedly pressing the F8 key. This may trigger the advanced boot options menu.
  3. Select Safe Mode: Once you successfully access the advanced boot options menu, you will see a list of boot options. Use the arrow keys on your keyboard to navigate to the “Safe Mode” or “Safe Mode with Networking” option. Press Enter to select it.
  4. Wait for Windows to start in Safe Mode: After selecting Safe Mode, your laptop will continue to boot, but only essential drivers and services necessary for basic functionality will be loaded. This helps isolate any conflicts with third-party drivers or software that might be causing the startup problem.
  5. Troubleshoot and diagnose: Once you’re in Safe Mode, observe if your laptop starts up without any issues. If it does, it indicates that a driver or software conflict is likely causing the problem. You can proceed with further troubleshooting steps, such as uninstalling recently installed software or updating problematic drivers.
  6. Restart to exit Safe Mode: When you’re finished troubleshooting in Safe Mode, you can restart your laptop to exit it. Simply click on the “Start” menu, select “Power,” and then choose “Restart.” Your laptop will boot back into normal mode.

Please note that the process of entering Safe Mode may vary slightly depending on your laptop’s manufacturer or Windows version.

If the F8 key or Shift + F8 key method doesn’t work, you can consult your laptop’s documentation or the manufacturer’s support website for specific instructions on entering Safe Mode for your particular model.


Perform a System Restore.

If your laptop started properly in Safe Mode and you suspect that a recent Windows update caused the issue, you can try using the System Restore feature to revert your system back to a previous state before the update. Here’s how you can perform a System Restore:

  1. Search for “System Restore”: In the Windows search bar, typically located in the taskbar, type “System Restore” and select the “System Restore” tool from the search results. Click on it to open the System Restore window.
  2. Open System Restore: The System Restore window will open, displaying a welcome message. Read the information provided and click “Next” to proceed.
  3. Select a restore point: In the next window, you’ll see a list of available restore points. These are points in time when your system created a snapshot of its configuration. Choose a restore point that predates the Windows update you suspect caused the issue. You can also select the option to show more restore points if needed. Once you’ve selected a restore point, click “Next” to continue.
  4. Confirm the restore point: Double-check the selected restore point and make sure it’s the one you want to use. It’s advisable to review the description of the restore point for any additional information. Click “Finish” to start the System Restore process.
  5. Start the restore process: A confirmation window will appear, informing you that System Restore cannot be interrupted once it begins. Make sure to save any open work and close any important programs before proceeding. Click “Yes” to confirm and start the restoration process.
  6. Wait for the restoration to complete: Your laptop will restart and begin the System Restore process. This may take some time, so be patient and avoid interrupting the process. Your laptop will restart again once the restoration is finished.
  7. Check if the issue is resolved: After the restart, your laptop will have been restored to the selected restore point. Check if the problem that occurred after the Windows update has been resolved. If the issue persists, you can try alternative troubleshooting steps or seek further assistance.

Please note that performing a System Restore will revert your system settings, programs, and drivers to a previous state.

It does not affect your personal files, but it’s always a good idea to back up important data before proceeding with any major system changes.


Uninstall recent updates.

If you suspect that a specific Windows update is causing the issue on your laptop, you can try uninstalling it. Here’s how you can uninstall recent updates:

  1. Open the Settings: Click on the Start button located in the bottom-left corner of your screen, and then click on the gear icon to open the Settings app.
  2. Go to Update & Security: In the Settings app, locate and click on the “Update & Security” option.
  3. Open Windows Update: In the Update & Security settings, click on the “Windows Update” tab located on the left-hand side.
  4. View update history: On the Windows Update page, click on the “View update history” link. This will open a window displaying a list of recent updates installed on your laptop.
  5. Uninstall updates: In the “View update history” window, click on the “Uninstall updates” link at the top of the page. This will open the Control Panel with a list of installed updates.
  6. Select the update to uninstall: In the Control Panel window, you’ll see a list of installed updates. Locate the specific update that you suspect is causing the issue. You can identify it by its name or the date it was installed. Once you’ve found the update, right-click on it and select “Uninstall” from the context menu.
  7. Follow the prompts to complete the uninstallation: A confirmation prompt will appear asking if you want to uninstall the selected update. Click “Yes” to proceed. Follow any additional prompts or instructions that appear to complete the uninstallation process.
  8. Restart your laptop: After the update is uninstalled, it’s recommended to restart your laptop to apply the changes. You can do this by clicking on the Start button, selecting the Power icon, and choosing “Restart” from the options.

After the restart, check if the issue you were experiencing has been resolved. If the problem persists or you’re unsure which update is causing the issue, you can also consider seeking further assistance or performing additional troubleshooting steps.


Update drivers.

Outdated or incompatible drivers can sometimes cause startup issues on your laptop. To address this problem, you can update your drivers by following these steps:

  1. Identify your laptop model: Find out the specific model of your laptop. This information is usually available on a label on the bottom of your laptop or in the system information settings.
  2. Visit the manufacturer’s website: Go to the official website of your laptop’s manufacturer. Look for a support or downloads section on the website.
  3. Locate the drivers section: In the support or downloads section, locate the drivers or software section. It may be labeled as “Drivers,” “Downloads,” or something similar.
  4. Choose your laptop model: Select your laptop model or enter the model number in the search bar provided on the website. This will help narrow down the available drivers to those specifically designed for your laptop.
  5. Locate graphics and chipset drivers: Look for the latest graphics and chipset drivers for your laptop. These drivers are crucial for proper functioning and performance. They are usually available under separate categories or subcategories, such as “Graphics” or “Display.”
  6. Download and install the drivers: Once you’ve located the latest drivers for graphics and chipset, download them to your laptop. Make sure to select the drivers that match your operating system version (e.g., Windows 10, 64-bit). After the download is complete, run the installer and follow the on-screen instructions to install the drivers.
  7. Restart your laptop: After installing the updated drivers, it’s important to restart your laptop. This allows the changes to take effect and ensures that the updated drivers are properly loaded.

By updating the graphics and chipset drivers, you provide your laptop with the necessary software to function optimally and resolve any compatibility issues that might have been causing the startup problem.

In addition to graphics and chipset drivers, you may also consider updating other drivers, such as those for network adapters, audio devices, or touchpad.

If you encounter any difficulties during the driver update process or if the startup issue persists, it may be helpful to consult the manufacturer’s support documentation or reach out to their customer support for further assistance.


Run Startup Repair.

If your laptop fails to start normally, you can use the Windows Startup Repair tool to help diagnose and fix startup issues. Here’s how you can run Startup Repair using a Windows installation or recovery media:

  1. Obtain a Windows installation or recovery media: You will need a bootable USB or DVD containing a Windows installation or recovery image. You can create one using another computer or download it from the official Microsoft website.
  2. Boot from the installation or recovery media: Insert the USB drive or DVD into your laptop and restart it. Make sure to set your laptop to boot from the media in the BIOS settings or by using the boot menu key (usually F12 or Esc). This will vary depending on your laptop’s manufacturer.
  3. Select “Repair your computer”: After booting from the installation or recovery media, you will be presented with the Windows Setup screen. Select your language preferences, then click on “Next.” On the next screen, click on “Repair your computer” at the bottom left.
  4. Choose the operating system and startup repair: In the “Choose an option” screen, select your operating system (if prompted) and then click on “Troubleshoot.” In the Troubleshoot menu, click on “Advanced options,” followed by “Startup Repair.” Windows will attempt to diagnose and fix any startup issues.
  5. Follow the on-screen instructions: The Startup Repair tool will scan your laptop for problems and attempt to fix them automatically. It may take some time to complete the repair process. Follow the instructions that appear on the screen and provide any additional information or permissions that are requested.
  6. Restart your laptop: Once the Startup Repair tool completes its process, it will either notify you of the repairs made or inform you if no issues were found. At this point, click on “Finish” or “Restart” to restart your laptop.
  7. Check if the issue is resolved: After the restart, observe if your laptop starts up normally without any issues. If the problem persists, you may need to explore additional troubleshooting steps or seek further assistance.

Running the Startup Repair tool can help identify and fix common startup issues caused by corrupted system files or misconfigurations.

It’s a useful tool for resolving startup problems without having to perform a full reinstallation of Windows.


Seek professional help.

If you have tried all the previous troubleshooting steps and your laptop still won’t start after a Windows update, it may be best to seek professional help.

Taking your laptop to a qualified technician can provide you with expert assistance in diagnosing and resolving the issue. Here’s why seeking professional help can be beneficial:

  1. Expertise and experience: Professional technicians have the knowledge, expertise, and experience to troubleshoot and fix complex computer issues. They are familiar with various hardware and software configurations and can accurately diagnose the problem that is preventing your laptop from starting properly.
  2. Advanced diagnostics and tools: Technicians have access to specialized diagnostic tools and equipment that can help identify hardware faults or software conflicts that may not be easily detected through standard troubleshooting methods. They can perform in-depth diagnostics to pinpoint the exact cause of the startup problem.
  3. Repairs and replacements: If any hardware components are found to be faulty, a professional technician can provide you with the necessary repairs or replacements. They have access to genuine replacement parts and can ensure proper installation and configuration of the components.
  4. Warranty considerations: If your laptop is still under warranty, seeking professional help from an authorized service center is often recommended. They can perform repairs or offer solutions while maintaining the warranty coverage on your device.
  5. Time and convenience: Consulting a professional technician saves you time and effort in attempting to fix the problem yourself. They can efficiently diagnose and resolve the issue, minimizing downtime and getting your laptop back up and running.

To find a professional technician, you can reach out to the manufacturer’s official support channels or search for authorized service centers in your area.

Reading reviews and seeking recommendations from trusted sources can also help you find reliable and reputable technicians.

Remember to back up your important data before taking your laptop for repair, as some troubleshooting steps or repairs may involve data loss or the need to reinstall the operating system.

By seeking professional help, you increase the likelihood of getting your laptop repaired effectively and restoring it to normal operation.

Here’s a tabular format with 15 possible causes of laptop startup issues, along with information on how, when, where they occur, and potential fixes:

CauseHow it happensWhen it occursWhere it occursPotential Fixes
1. Corrupted system filesDue to improper shutdown or malwareDuring startup processAnywhereRun Startup Repair, System File Checker, or reinstall Windows
2. Incompatible driversInstalling incompatible or outdated driversAfter driver installationAnywhereUpdate drivers to the latest version from the manufacturer’s website
3. Hardware conflictsConflicting hardware componentsDuring startup processInside the laptopDisconnect or replace conflicting hardware
4. Insufficient power supplyInsufficient power reaching the laptopDuring startup processAnywhereCheck power adapter, battery, or try a different power source
5. Faulty RAM modulesDefective or incompatible RAM modulesDuring startup processInside the laptopReseat or replace RAM modules
6. Hard drive issuesMalfunctioning or failing hard driveDuring startup processInside the laptopCheck hard drive health, repair or replace it if necessary
7. Malware or virus infectionMalicious software affecting startupDuring startup processAnywhereScan for malware using antivirus software, remove infections
8. BIOS or UEFI settingsIncorrect or misconfigured BIOS or UEFI settingsDuring startup processInside the laptopReset BIOS or UEFI settings to default, update firmware if available
9. OverheatingExcessive heat causing hardware instabilityDuring startup processInside the laptopClean dust from fans, ensure proper ventilation, consider cooling solutions
10. Software conflictsConflicting software or applicationsAfter installing new softwareOperating system or specific programsUninstall or update conflicting software or applications
11. Faulty power buttonDefective or stuck power buttonDuring startup processOn the laptop’s exteriorClean or replace the power button
12. BIOS or UEFI corruptionCorrupted BIOS or UEFI firmwareDuring startup processInside the laptopReflash or update BIOS or UEFI firmware
13. Incorrect boot orderIncorrect boot order settingsDuring startup processInside the laptopAdjust boot order in BIOS or UEFI settings
14. Failed Windows updateFailed or incomplete Windows updateAfter Windows updateOperating systemUse System Restore, uninstall problematic updates
15. Faulty motherboardDefective motherboardDuring startup processInside the laptopConsult a professional technician, replace the motherboard

Please note that the potential fixes provided are general recommendations and may vary depending on the specific issue and laptop model. It’s always advisable to consult professional technicians or refer to official support documentation for accurate troubleshooting steps.


In conclusion, encountering startup issues after a Windows update can be frustrating, but there are several troubleshooting steps you can take to resolve the problem.

Start by power cycling your laptop and checking for any error messages displayed on the screen.

If the issue persists, try booting into Safe Mode to determine if the problem is caused by conflicting drivers or software.

You can also consider performing a System Restore to revert your system back to a previous state before the update.

If none of these steps work, you can try uninstalling the recent updates or updating your drivers, particularly graphics and chipset drivers, as outdated or incompatible drivers can cause startup problems.

Running the Startup Repair tool using a Windows installation or recovery media can also help diagnose and fix common issues.

However, if you have exhausted all the troubleshooting steps and the problem still persists, it may be best to seek professional help from a qualified technician. They can provide expert assistance, advanced diagnostics, and necessary repairs to get your laptop up and running again.

Remember to back up your important data before attempting any troubleshooting or repair steps to avoid potential data loss. By following these steps and seeking professional help if needed, you increase the chances of resolving the startup issue and getting your laptop back to normal operation.

Leave a Comment

We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners. View more
Cookies settings
Privacy & Cookie policy
Privacy & Cookies policy
Cookie nameActive

Who we are

Our website address is:

What personal data we collect and why we collect it


When visitors leave comments on the site we collect the data shown in the comments form, and also the visitor’s IP address and browser user agent string to help spam detection. An anonymized string created from your email address (also called a hash) may be provided to the Gravatar service to see if you are using it. The Gravatar service privacy policy is available here: After approval of your comment, your profile picture is visible to the public in the context of your comment.


If you upload images to the website, you should avoid uploading images with embedded location data (EXIF GPS) included. Visitors to the website can download and extract any location data from images on the website.

Contact forms


If you leave a comment on our site you may opt-in to saving your name, email address and website in cookies. These are for your convenience so that you do not have to fill in your details again when you leave another comment. These cookies will last for one year. If you visit our login page, we will set a temporary cookie to determine if your browser accepts cookies. This cookie contains no personal data and is discarded when you close your browser. When you log in, we will also set up several cookies to save your login information and your screen display choices. Login cookies last for two days, and screen options cookies last for a year. If you select "Remember Me", your login will persist for two weeks. If you log out of your account, the login cookies will be removed. If you edit or publish an article, an additional cookie will be saved in your browser. This cookie includes no personal data and simply indicates the post ID of the article you just edited. It expires after 1 day.

Embedded content from other websites

Articles on this site may include embedded content (e.g. videos, images, articles, etc.). Embedded content from other websites behaves in the exact same way as if the visitor has visited the other website. These websites may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with that embedded content, including tracking your interaction with the embedded content if you have an account and are logged in to that website.


Who we share your data with

How long we retain your data

If you leave a comment, the comment and its metadata are retained indefinitely. This is so we can recognize and approve any follow-up comments automatically instead of holding them in a moderation queue. For users that register on our website (if any), we also store the personal information they provide in their user profile. All users can see, edit, or delete their personal information at any time (except they cannot change their username). Website administrators can also see and edit that information.

What rights you have over your data

If you have an account on this site, or have left comments, you can request to receive an exported file of the personal data we hold about you, including any data you have provided to us. You can also request that we erase any personal data we hold about you. This does not include any data we are obliged to keep for administrative, legal, or security purposes.

Where we send your data

Visitor comments may be checked through an automated spam detection service.

Your contact information

Additional information

How we protect your data

What data breach procedures we have in place

What third parties we receive data from

What automated decision making and/or profiling we do with user data

Industry regulatory disclosure requirements

Save settings
Cookies settings